An optimized continuous miner system moves smoothly from location to location without requiring workers to dismantle parts.
Please visit our website for more information on this topic.
Other elements of a high-quality continuous miner include:
The ability to navigate around right-angle turns with a small radius
Enough room to allow for adequate ventilation
Space to allow miners to install strata supports throughout the mining process
The continuous miner should also have a roof and bolter attached. However, these elements should not prevent construction personnel from placing support pattern rows.
For the most part, continuous miners offer companies high advance rates. However, longwall retreat rates and longwall continuity issues remain a concern for mines that utilize continuous miners.
Developing longwall continuity can strain other service functions, such as personnel, material handling, dust ventilation, water and power supplies, and gas drainage.
Despite these issues, continuous miner systems make coal mining faster while minimizing blasting. In addition, these machines make it possible to meet the increasing demand for underground coal production.
Read on for more information about how companies can use continuous miners to streamline their mining processes while ensuring a safer working environment.
Surface coal mining generally involves the following sequence of unit operations: (1) clearing the land of trees and vegetation, (2) removing and storing the top layers of the unconsolidated soil (topsoil), (3) drilling the hard strata over the coal seam, (4) fragmenting or blasting the hard strata with explosives, (5) removing the blasted material, exposing the coal seam, and cleaning the top of the coal seam, (6) fragmenting the coal seam, as required, by drilling and blasting, (7) loading the loose coal onto haulage conveyances, (8) transporting the coal from the mine to the plant, and (9) reclaiming lands affected by the mining activity.
Highwall mining is an adaptation of auger mining. Instead of an auger hole, an entry into the coal seam is made by a continuous miner, remotely operated from a cabin at the surface. The cut coal is transported by conveyors behind the miner to the outside. Using a television camera, the operator can see and control the miner’s progress. The entry can be advanced 300 to 400 metres into the coal seam, after which the miner is retreated to the surface and repositioned to drive an entry adjacent to the previous one. Advantages over augering include higher productivity, greater safety, and lower cost.
Auger mining is usually associated with contour strip mining. With this method, the coal is removed by drilling auger holes from the last contour cut and extracting it in the same manner that shavings are produced by a carpenter’s bit. Coal recovery rates approach 60 percent with this method. The cutting heads of some augers are as high as 2.5 metres. As each stem works its way into the coal seam, additional auger stems are added, so that hole depths of more than 60 to 100 metres are not uncommon. Problems of subsidence , water pollution , and potential fires are associated with augering.
In open-pit mining of the coal seam, several benches are established in both the overburden strata and the coal seam. The open-pit method is generally practiced where thick coal seams are overlain by thick or thin overburden; it is also used for mining steeply pitching coal seams. In the beginning stages of mining, considerable volumes of overburden materials must be accumulated in large dump areas outside the mine.
Area mining, applied where the terrain is flat, commences with a trench or “box cut” made through the overburden to expose a portion of the coal seam. This trench is extended to the limits of the property in the strike direction. After coal removal, a second cut is made parallel to the first one, and the overburden material from this cut is placed in the void of the first cut. The process is repeated in successive parallel cuts until the stripping ratio indicates that continued surface mining is uneconomical.
Contour mining is commonly practiced where a coal seam outcrops in rolling or hilly terrain. Basically, the method consists of removing the overburden above the coal seam and then, starting at the outcrop and proceeding along the hillside, creating a bench around the hill. In the past, the blasted overburden spoil was simply shoved down the hill; currently, soil is either carried down the mountain to fill a chosen valley in horizontal layers or is replaced on the working bench itself in places where coal has been removed. If the break-even stripping ratio remains favourable, further cuts into the hillside will be made. Otherwise, if there are sufficient reserves under the knob of the hill, the coal may be recovered by underground mining or by augering.
A variety of equipment is used in a surface mining operation. In land clearing, topsoil removal, and preparation of the mining area for subsequent unit operations, bulldozers and scrapers have extensive applications. These pieces of equipment have grown bigger and better over the years. Currently, scrapers for rock have bucket capacities of 33 cubic metres (1,165 cubic feet; about 47 tons of material), and scrapers for coal have capacities of 43 cubic metres (37 tons). Bulldozers have blade capacities up to 30 cubic metres.
Goto TRM to know more.
Where strata are hard, drilling and blasting are necessary. Blastholes are generally drilled from the surface, are vertical, and vary in diameter from 25 to 100 centimetres. In some mines, horizontal holes are drilled into the overburden with the drill sitting on the coal surface. The holes are charged with explosives that are based on a mix of ammonium nitrate and fuel oil (ANFO) in dry mix, slurry, or emulsion form. It is common to have a bulk-explosive truck drive into the area where holes have been drilled to fill holes with custom-designed explosive mixtures.
Overburden removal is the most important operation in the system. When the haul distances are small (for example, 500 to 1,000 metres) and the overburden material soft, a fleet of scrapers can load, haul, and dump the overburden. Where distances are very small (for example, 30 to 40 metres), mobile front-end loaders, or wheel loaders, may be used to load, haul, and dump. At greater haul distances, a fleet of trucks may be necessary, the trucks being loaded by front-end loaders.
Three types of shovel are currently used in mines: the stripping shovel, the loading (or quarry-mine) shovel, and the hydraulic shovel. The hydraulic mining shovel has been widely used for coal and rock loading since the 1970s. The hydraulic system of power transmission greatly simplifies the power train, eliminates a number of mechanical components that are present in the loading shovel, and provides good crowding and breakout forces. Hydraulic and loading shovels are available with capacities up to and over 30 cubic metres. The capacity of the loading shovel is carefully matched with the haul unit into which the load will be dumped. In open-pit coal mines, the haul units for overburden material are usually large, off-highway, end-dumping trucks; their capacities range from 35 to 250 tons. The stripping shovel has a large bucket, usually sits in the pit on the top of the coal seam, digs into the overburden material, and deposits it in the adjacent mined-out area.
DraglinesDraglines are by far the most commonly used overburden-removal equipment in surface coal mining. A dragline sits on the top of the overburden, digs the overburden material directly in front of it, and disperses the material over greater distances than a shovel. Compared with shovels, draglines provide greater flexibility, work on higher benches, and move more material per hour. The largest dragline in operation has a bucket capacity of 170 cubic metres.
The bucket-wheel excavator (BWE) is a continuous excavation machine capable of removing up to 12,000 cubic metres per hour. The most favourable soil and strata conditions for BWE operation are soft, unconsolidated overburden materials without large boulders. BWEs are widely employed in lignite mining in Europe, Australia, and India. In these mines, the wheel excavators deposit the overburden and coal materials onto high-speed, high-capacity belt conveyors for transport to the mined-out areas of the pit and the coal stockpile, respectively. In the United States, wheel excavators have been used in combination with shovels or draglines, with a wheel handling soft topsoil and clay layers and a shovel or dragline removing hard strata.
Coal is usually loaded by front-end loaders, loading shovels, or wheel excavators into off-highway, bottom-dump trucks for transport to the stockpile. In small operations, it can be loaded into on-highway trucks for direct shipment to customers. In some open-pit operations with BWEs, rail haulage is practiced in the benches themselves, coal and overburden being loaded directly into railcars by the wheel excavator. Nevertheless, in BWE operations belt haulage is preferable, as it facilitates continuous mining.
Equipment used in reclaiming mined lands includes bulldozers, scrapers, graders, seeders, and other equipment used extensively in agriculture. Reclamation operations, which include backfilling the last cut after coal removal, regrading the final surface, and revegetating and restoring the land for future use, are integrated with the mining operation in a timely manner in order to reduce erosion and sediment discharge, slope instability, and water-quality problems.
A primary goal of reclamation is to restore or enhance the land-use capability of disturbed land. Various reclamation programs aim at restoring the ground for farming and livestock raising, reforestation, recreation, and housing and industrial sites. Even spoil banks that can be revegetated present only minor problems and have great potential for development. There are, however, marginal and problem spoils (such as those containing acids or toxic wastes) that require special attention and additional planning.
If you want to learn more, please visit our website Split Set Mining Systems.