506 Words
|3 Pages
Tn was originally isolated from bacteroides fragilis [30] . The transposon was successfully introduced into Cytophaga succinicans, Flavobacterium meningosepticum, Flexibacter canadiansis, Flexibacter strain SFI and Sporocytophaga myxococcoides by conjugation [25]. Tn carries two antibiotic resistance gene. One of the codes for resistance to erythromycin and clindamycin which is expressed in bactroides but not in E.Coli. The other gene codes for resistance in tetracycline and is expressed in aerobically grpwn E. coli, but not in anaerobically grpwn E. coli or in bacteroides.
Read More592 Words
|3 Pages
The investigation was carried out to identify the presence or absence of biological molecules in serum . If the concentration in each test tube of the dilutions carried out will be more concentrated then the concentration of the test tube before it, then the color will be at an equal concentration with the other dilutions performed. The hypothesis was wrong because of the difference in concentrations due to the different measurements within the dilutions done. The test for starch was to add a drop of iodine solution to the pipette in the spotting tile. A reducing sugar solutions is add inside a test tube with 3 drops to then add 3 drops of benedicts and plane in a water bath.
Read More407 Words
|2 Pages
&#; Write down the highlighted numbers. Do you observe a pattern? &#; Does the pattern grow? What is the reason for this? &#; Write down the last number (say 53).
Read More155 Words
|1 Pages
Suppose you need to find the fractional European call and the fractional European put options. Let the Hurst parameter be $H=0.85$, the $\sigma=0,25$, $r=0.10$, $S_{fbm} = 100$, $K = 95$, we have \begin{eqnarray*} d_1^{fBm} & = & \frac{\ln{\frac{S}{K}} + \frac{1}{2}(r( T - t) + \frac{(1)\sigma^2{( T^{2H} - t^{2H})}}{2})}{\sigma{\sqrt{T^{2H} - t^{2H}}}}\\ & = & \frac{\ln(\frac{105}{100}) + (0.10(0.25 -0) + \frac{(1){0.25^2}{0.25^{2(0.85)} - (1)0.25^{2(0.85)}}}{2}}{(0.25){\sqrt{0.25^{2(0.85)} - 0}})} \end{eqnarray*} we obtain $d^{fBm}_1= 1.$. We find in the normal distribution that $N(1.)= 0.$ and $N(-1.) = 0..$
Read More704 Words
|3 Pages
Lab Report 5: Acetylsalicylic Acid (Aspirin) Synthesis Name: Divya Mehta Student #: Date Conducted: November 19th Date Submitted: November 26th Partner&#;s Name: Kirsten Matthews Lab Section: Wednesday 2:30 L9 IAs Name: Brittany Doerr Procedure: For the procedure, see lab manual (CH110 Lab Manual, Fall ) pages 96-98. Wilfrid Laurier University Chemistry Department. Fall . Acetylsalicylic Acid (Aspirin) Synthesis.
Read More485 Words
|2 Pages
Testing phase finds differences in positive/negative documents by the centroid obtained in training phase by ranking each of them. The simple way to estimate similarity between documents and centroid by summing weights of patterns which are in the documents. VII. Experimental Results To determine accurate measures of similarity or difference between documents you depict results by graph pattern and table pattern. The experimental setup consists of relevant documents that you termed as positive and negative documents .i.e
Read More313 Words
|2 Pages
Elijah Brycth B. Jarlos IX-Argon 1. Multicellularity is a condition of an organism to have multicellular cells. An example of a organism who has multicellular cells are plants, animals, and humans. The main reason of why scientists have a hard time finding a good set of existing organisms to compare. Is neither the first set of organisms which is being compared is dying as fast as the second specimen is being examined or they just can&#;t find the right species.
Read More717 Words
|3 Pages
In this diagram we can see that acetaminophen consists of a benzene ring core, with hydroxyl and amide functional groups in proxy. Benzene (C6H6) is a hydrocarbon composed of 6 carbon atoms (92.26% of the molecule) and 6 hydrogen atoms (7.74% of the molecule) with alternating double and single bonds (resonance bonds) and is aromatic because of this. Benzene is a natural part of petroleum, usually <1.0% by weight, but is found in many things used today. Benzenes most common use is to produce ethylbenzene, with over half of the benzene used in the production of ethylbenzene. Benzene is a clear, colourless and highly volatile liquid which is soluble in water at an average room temperature (23.5o).
Read MoreWords
|5 Pages
Using method 2, the product appear as white crystals. Given that the yellow color remain throughout the product in method 2, too much aldehyde was added. It was predicted that this was the source of error because aldehyde was a yellow liquid. In this experiment, 293 mg of aldehyde was weighted for method 1 instead of 250 mg and.
Read More650 Words
|3 Pages
David Shabazi BIOL476 Cindy Malone 11/1/17 Semaphorin Signaling Regulates Vascular and Hematopoietic Regeneration Dr. Heather Himburg, Ph.D&#;s lab utilizes semaphorin 3A signaling to promote bone marrow and vascular recovery following radiation injury. Semaphorin 3A, or SEMA3A for short, is a protein that&#;s heavily involved in the regulation of patterns in normal neuronal development. Himburg focuses on treating radiation damage in particular because of the following reasons.
Read More532 Words
|3 Pages
The Identity of the unknown, in this case unknown A, was determined to be acetyl salicylic acid. This was determined by comparing the melting points of the purified unknown crystals to the crude unknown. The known melting point range for acetyl salicylic acid is 135°C -136°C. The Unknown&#;s melting point was slightly off at 128.6°C - 132°C. This can be due to impurities of the crystals during the purification process.
Read More400 Words
|2 Pages
Sodium bromide and 1-butanol are dissolved in water since the bromide ion from the sodium bromide and the four carbon chain from the 1-butanol are the desired components of 1-bromobutane. In order to get the sodium bromide and the 1-butanol to react sulfuric acid is added to react with the sodium bromide and combine with the sodium ion producing hydro-bromic acid. Later, when the flask is heated the bromide ion will be able to combine with the four carbon chain of the 1-butanol. During the process of this reaction the reagents were kept cool in an ice bath to avoid the possible evaporation of any of the solution.
Read MoreWords
|7 Pages
Specific Aims/Hypothesis(es) to be tested Bacterial Vaginosis (BV) is the most common cause of vaginal symptoms among women of reproductive age, ages 15-44 years. The number of lactobacilli in the vagina of women with BV is significantly lower than that in healthy women. While some women may be asymptomatic, most experience thin, white or yellow abnormal vaginal discharge and malodor, especially after intercourse. Women with BV have an increased risk of many gynecological complications. Bacterial infections have been linked to increased risk factors for many sexually transmitted infections (STIs), including human immunodeficiency virus (HIV) infection.
Read MoreWords
|5 Pages
5-membered rings containing heteroatom11 One hetero atom11 Figure 1.3: Structure showing the heterocyclic compound having one hetero atom Two hetero atoms Figure 1.4: Structure showing the heterocyclic compound having two hetero atoms 6-membered ring containing heteroatom11 Figure 1.5: Structure showing the six membered heterocyclic compounds Unsaturated and saturated heterocyclic compound12 Figure 1.6: Structure of saturated and unsaturated heterocyclic compounds 1.7 AZOLES Azoles are the class which contain five member ring, having nitrogen heterocyclic ring compound containing at least one other heteroatom (or non-carbon atom) of nitrogen, sulfur or oxygen and are considered to be derived from pyrrole, furan and thiophene by substitution of methane groups (&#;CH=) by pyridine type nitrogen (&#;N=) atoms from the different positions. Azole mainly consists of: (i) Oxygen is referred as oxazole (ii) Sulphur is referred as thiazole and (iii) Nitrogen is referred as pyrazole, imidazoles or imidazolines12. 1, 3-Azoles synthesis12 Scheme 1.1: Synthesis of 1, 3-Azoles by Cyclodehydration of α-acylaminocarbonyl compound12 1.8 OXAZOLE
Read More767 Words
|4 Pages
Abstract The unknown concentration of benzoic acid used when titrated with standardized 0.M NaOH and the solubility was calculated at two different temperatures (20&#;C and 30&#;C). With the aid of the Van&#;t Hoff equation, the enthalpy of solution of benzoic acid at those temperatures was determined as 10.82 KJ. This compares well with the value of 10.27KJ found in the literature.
Read MoreOrg. Synth. , 61, 14
DOI: 10./orgsyn.061.
OXIDATION OF 5-AMINOTETRAZOLES:
BENZYL ISOCYANIDE
You will get efficient and thoughtful service from Boraychem.
[
Benzene, isocyanomethyl
]1. Procedure
Caution! This preparation should be conducted in an
efficient hood
because of the obnoxious odor of the isocyanide.5-Benzylaminotetrazole
. Freshly distilledbenzaldehyde
(21.2 g, 0.2 mol) is added in one portion to a warm (50°C) solution of5-aminotetrazole
(17.2 g, 0.2 mol)(Note 1)
andtriethylamine
(20.2 g, 0.2 mol) in100 mL of absolute
methanol
. After 15 min the reaction mixture is cooled to room temperature, transferred to anautoclave
, and hydrogenated with agitation at room temperature overPd
(10%) oncarbon
(1 g) for 18 hr at 500 psi (pounds per square inch) ofhydrogen
. The catalyst is removed by filtration and all volatile material is removed at 60°C under aspirator pressure. The gummy tan solid is triturated with 250 mL of hot water. Aqueous20%
HCl
is added until pH 3 is reached. The mixture is cooled to room temperature and the solid collected, washed with water, and dried over-night at room temperature under reduced pressure (100 μ); yield:27.5 g
(80%
), mp183.5&#;185°C
(lit.2 mp183°C
).A.. Freshly distilledis added in one portion to a warm (50°C) solution ofandin. After 15 min the reaction mixture is cooled to room temperature, transferred to an, and hydrogenated with agitation at room temperature overfor 18 hr at 500 psi (pounds per square inch) of. The catalyst is removed by filtration and all volatile material is removed at 60°C under aspirator pressure. The gummy tan solid is triturated with 250 mL of hot water. Aqueousis added until pH 3 is reached. The mixture is cooled to room temperature and the solid collected, washed with water, and dried over-night at room temperature under reduced pressure (100 μ); yield:), mp(lit.mp).
B.
Benzyl isocyanide
. In a500-mL, round-bottomed flask
equipped with amagnetic stirring bar
and apressure-equalizing funnel
are placed5-benzylaminotetrazole
(10.5 g, 60 mmol),100 mL of 10%
sodium hydroxide
solution, and70 mL of
dichloromethane
. The mixture is cooled to 0°C and a solution ofNaOBr
in water (165 mL, 65 mmol)(Note 2)
is added with vigorous stirring over a 15-min period(Note 3)
. Thedichloromethane
layer is separated and the aqueous phase extracted with five50-mL portions of
dichloromethane
. The combineddichloromethane
extracts are dried over anhydrousMgSO4
, the drying agent is removed by filtration, and thedichloromethane
is removed by simple distillation. The pressure is then reduced to ~20 mm with an aspirator andbenzyl isocyanide
is distilled at98&#;100°C
; yield:5.91 g
(84%
)(Note 4)
and(Note 5)
.The company is the world’s best 5-Aminotetrazole Monohydrate supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.