For those unfamiliar with LED explosion-proof lights, selecting the right one can be daunting, often leading to a regrettable purchase of inferior products. Therefore, to prevent such mishaps, it&#;s crucial to research and understand how to choose the correct LED explosion-proof lights.
Please visit our website for more information on this topic.
Three main aspects should be considered: the light&#;s cooling system, the type of chip used, and the driver power configuration. Many people prioritize low prices, but this often means compromised quality. For a LED explosion-proof light that meets performance standards, high-quality components are essential.
The selection, installation, use, and maintenance of explosion-proof LED lights are critical to ensure their long-term safety, reliability, and efficiency.
1. Selection: Individuals responsible for selecting these lights should understand the fundamental principles of explosion-proof lighting and be familiar with the relevant explosion-proof certifications.
2. Classification and Type: Choose the explosion-proof category, type, level, and temperature group according to the level of explosive hazard in the area.
3. Environmental Conditions and Requirements: Consider the conditions and requirements of the environment where the light will be used. For instance, outdoor explosion-proof lights should have a minimum protection level of IP43. In places where color distinction is crucial, avoid high-pressure mercury and sodium lamps as they have poor color rendering.
4. Product Information: Read the product manual thoroughly to understand its performance, precautions, and limitations. Pay attention to markings like &#;x&#; after the explosion-proof certification number, indicating specific application areas for the light.
With the significant presence of LED explosion-proof lights in the industry and the vast array of options available, it&#;s essential to know how to identify high-quality ones.
Certification: Look for lights with explosion-proof certification, an essential credential for any explosion-proof lighting.
Light Distribution: Assess whether the lighting is well-distributed. Lights with low brightness, limited coverage, significant disparity between power and performance, or poor distribution should be avoided.
In an industrial setting, where safety and illumination are vital to the many operations there, explosion-proof LED light fixtures are absolutely essential. Designed to withstand hazardous environments, these lights provide a stable and safe source of illumination that the various industries need to function. However, like any other lighting technology, explosion-proof LED flood lights also require proper care and maintenance to ensure they continue to perform optimally throughout their lifespan. Here are four simple but helpful tips to extend the longevity of your explosion-proof LED light fixtures.
Learn more: 3 Factors To Consider When Selecting Explosion-Proof Lighting For Your Warehouse
Pay Attention to Temperature and Humidity
In an industrial environment where temperature and humidity levels can easily fluctuate, it&#;s important to monitor the ambient temperature and humidity levels in the area where your explosion-proof LED flood lights are installed. While these lights are especially designed to operate efficiently in a range of temperatures, excessive heat or cold may still lead to premature failure.
To that end, be sure to keep the explosion-proof LED light fixtures within the recommended temperature range as specified by the manufacturer. If they absolutely must be in a place that exceeds the allotted range, consider using light fixtures with a higher IP (Ingress Protection) rating to prevent moisture from entering and damaging the internal components.
It&#;s also equally important to conduct routine inspections, specifically for signs of moisture ingress, such as condensation inside the explosion-proof LED light fixtures, as doing so can help you address these issues in a timely manner.
SAFER-Ex are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Switch Off the Lighting as Soon as It Is Not Required
Like most types of lighting, leaving your explosion-proof LED flood lights on continuously, especially when they&#;re not needed, can significantly reduce their lifespan. While these light fixtures are highly energy-efficient and therefore cost-effective, keeping them illuminated throughout can cause excess heat to be generated, which puts stress on the electronic components, including the LED chips and drivers.
To prolong the lifespan of your explosion-proof LED light fixtures, consider implementing a lighting control system that allows you to conveniently switch them off whenever they&#;re not in use. Timers, occupancy sensors, and even daylight sensors are all excellent tools to help automate this process, ensuring that the lights are only active when needed.
Use LED-Compatible Transformers
Source: Amazon
In some instances, your explosion-proof LED light fixtures may require transformers or power supplies to operate correctly, or at all. Using an inappropriate transformer or one that isn&#;t LED-compatible may lead to compatibility issues, such as flickering and reduced lifespan of your LED fixtures.
It&#;s important, therefore, to ensure that the transformers or drivers for your explosion-proof LED flood lights are specifically designed for LED technology. These transformers provide a stable and consistent power supply, reducing stress on the LED components and preventing premature failure. To prevent any unnecessary issues from occurring, always follow the manufacturer&#;s recommendations regarding compatible transformers and drivers for your LED fixtures.
Ensure the Light Fixtures Are Installed Correctly
Source: Thorne & Derrick International
Although it sounds relatively straightforward to do, it&#;s still important to be diligent and ensure that your explosion-proof LED light fixtures are installed correctly; doing otherwise could lead to issues such as poor heat dissipation, electrical problems, or worse, compromised explosion-proof protection. To maximise the lifespan of your light fixtures, we recommend following these practices:
- Ensure that your fixtures are securely mounted to prevent vibrations and movements that could damage internal components.
- Use appropriate seals and gaskets to maintain the explosion-proof integrity of the fixtures.
- Verify that electrical connections are secure and correctly wired to prevent short circuits or overheating.
- Regularly inspect fixtures for physical damage or signs of wear, and replace any damaged components promptly.
Additionally, if you want to ensure a proper installation job, it might be better to hire a professional technician to do so, especially if you&#;re working in hazardous environments where safety and compliance are critical factors.
The company is the world’s best Explosion Proof Led Lights supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.