Typical costs range from $4,200 to $7,600.
Get EstimateAll products and services featured are independently selected by our editors. However, when you buy something through our retail links, we may earn an affiliate commission.
The typical price range for a heat pump installation is $4,200 to $7,600, with an average of $5,900.* A heat pump is a sleek, efficient, and cost-effective way to heat and cool your home. Instead of generating new heat like traditional heating systems, a heat pump works by transferring heat from the air or ground outside into your home.
Heat pumps lower your energy bills and reduce your carbon footprint. We’ll go over various cost factors and installation options below.
*Article cost data sourced from Angi, Fixr, and Home Advisor.
Compare Quotes from HVAC Specialists
Just answer a few questions, and we’ll take care of the rest!
Get Free Estimates
Central AC Installation Cost
A central AC unit on average ranges from $3,800 to $7,700.
GET QUOTEHeat Pump Installation
A heat pump on average ranges from $3,700 to $11,000.
GET QUOTESplit AC Installation
Split AC units on average range from $3,700 to $11,000.
GET QUOTEThe cost of a heat pump depends on several factors, including the pump size, type, and efficiency rating.
Heat pumps are much more efficient than traditional heating models like baseboard heaters or gas furnaces. A heat pump’s efficiency rating is determined by its
Seasonal Energy Efficiency Ratio (SEER).
Higher SEER ratings mean more efficient systems. A pump with lower efficiency will cost less to install than a high-efficiency model, but will save you less money long-term.
A heat pump’s service capacity is determined according to how many British thermal units (BTUs) it needs to operate. An 18,000-BTU system weighs about 1.5 tons while a 60,000-BTU system is about 5 tons.
The system needs about 15 to 30 BTUs for each square foot it heats or cools. The larger your home, the more BTUs needed. A typical home of 2,000 square feet requires 30,000 to 60,000 BTUs. Many other factors affect your system’s performance, so only use these numbers as a guideline.
Your area’s climate, your home’s age, and many other factors also determine how large your heat pump unit needs to be. For reference, a small system of 1 to 2 tons can cost $3,500 to $5,500 while a 5-ton outdoor unit might cost $8,800 just for the unit, plus more for installation.
Residential heat pumps come in three main types: air-source, ductless, and geothermal.
Air-source heat pumps are the
most common type
and usually the most cost-effective. They use refrigerant-filled coils to absorb heat from the outdoor air and transfer it into your home. Prices for air-source heat pumps range from $4,500 to $8,000, depending on brand, size, and efficiency. The installation costs also vary, depending on the setup’s complexity.
Ductless heat pumps are a type of air-source pump specifically engineered for homes without a duct system. They’re often used in room additions, hyper-energy-efficient homes, or houses built with a non-ducted system. Ductless heat pumps cost $2,000 to $8,000 on average, but can run as high as $14,500 for larger models.
Geothermal heat pumps use a ground loop to draw heat from the earth or a body of water. These systems are more expensive than air-source heat pumps, costing between $6,000 and $20,000. Installation costs may also be higher due to the need for ground loop construction. However, geothermal heat pumps are typically more efficient than air-source pumps and may be eligible for energy tax credits.
In addition to these three primary types, you can find hybrid heat pumps that combine an air-source system with an electric furnace. There are also solar-powered systems, which tap into the sun’s energy through solar panels. These systems are usually more expensive than traditional air-sources at around $6,000 to $12,000.
Heat pumps are designed to move heat from one place to another, so the colder the region, the harder it is for the heat pump to work. Consequently, heat pumps are often more efficient in warmer regions.
A heat pump’s efficiency is measured by its
SEER rating
. The higher the
SEER rating
, the more efficient the unit will be in extracting energy from the air, and the
lower your
energy bills
will be. A heat pump with a
SEER rating
of 16 or higher is considered to be
energy efficient
. Heat pumps with higher
SEER ratings
cost more up-front, but can save you money long-term.
Pump efficiency is also determined by the unit’s
Heating Seasonal Performance Factor
(HSPF) rating. The Environmental Protection Agency (EPA) calculates HSPF by dividing the total electrical energy consumed by a heat pump (expressed in
BTUs
) by the total heating required during the heating season (expressed in watt-hours). The EPA awards an Energy Star label to heat pumps with an HSPF of 8.2 or higher. A good
HSPF rating
falls between 8 and 10.
Labor costs to install a heat pump vary by the type of heat pump and the job’s complexity. For example, a
ductless mini-split system is often more expensive to install
than a traditional central air conditioning system because of the additional components and installation complexity. Additionally, a heat pump that has special features such as variable-speed fan motors or advanced thermostat capabilities may require more labor. On average, labor costs $75 to $125 per hour.
Heat pumps come in various materials and quality levels, which affect the total project cost. Average heat pumps cost $4,200 to $7,600, while high-end systems can cost up to $10,000 or more. Higher-end systems are typically made from better materials and offer advanced performance, efficiency, and durability.
Brand can have a big impact on heat pump cost. Some of the top brands include Trane, Carrier, American Standard, Rheem, Bryant, and Goodman.
BrandAverage Unit CostGoodman$1,500–$3,900Bryant$1,600–$2,700Rheem$1,600–$3,200American Standard$2,000–$3,200Carrier$2,300–$3,900Trane$2,600–$4,200If you have existing ductwork that fits your new heat system, you can dramatically reduce your overall project costs. Heat pump installers can almost always use existing ductwork unless it’s damaged or poorly designed.
Ductwork may need repair or cleaning,
which could add to the project cost slightly. Adding new ductwork will increase the installation cost by an average of $2,000 to $3,000.
Larger homes typically require larger heat pumps to properly heat and cool them. For example, a two-bedroom home may require one unit, while a four-bedroom home will likely need two. The number of
square feet
in the home also matters. A 2,000-
square-foot home
may need two or three units, whereas a 5,000-
square-foot home
may require four or more.
In addition to your
home size
, consider how many people will use the system. More people usually means more demand for heating and cooling, so the system must be able to handle a heavier load.
In extreme climates, heat pumps may require additional components such as auxiliary heating systems or insulated refrigerant lines to ensure proper performance.
Geothermal heat pumps often provide more efficient service than air-source pumps in these environments. However, geothermal pumps can cost $6,000 to $20,000 more than other pump types. Installing a heat pump in a cold climate such as New York is often pricier because you may need additional components, larger systems, specialized labor, or repair of existing ductwork.
Installing a heat pump typically requires a construction permit. Different local governments require different permits, depending on the project’s scope and local regulations. Common permits required for a heat pump installation include electrical and plumbing permits, building permits, and zoning permits.
Depending on the municipality you’re located in, permit costs can run as high as $300. Rural areas with a low cost of living may charge less than urban areas where costs are generally high.
Obtaining a permit helps ensure your compliance with local regulations, thus avoiding fines or other penalties.
If you are an avid do-it-yourselfer (DIYer), installing your own heat pump can seem like a good way to save money. However, DIY heat pump installation isn’t for everyone and can be quite risky if you lack the correct experience and tools.
Professional
heat pump installation
means hiring a qualified technician or
HVAC contractor
who is experienced in installing, repairing, and maintaining heat pumps. A professional installation usually includes connecting the
new heat pump
to your electrical system, verifying proper
refrigerant
levels, and ensuring all components are functioning properly and safely.
Hiring a professional gives you access to a wide range of experienced contractors who will troubleshoot any problems that may arise during installation. It also guarantees safety and accuracy. Professional installers will advise you about the best heat pump type and size for your home and offer
energy efficiency
and cost-saving tips.
However, with these benefits come some possible disadvantages. Hiring a professional means paying for labor, operating according to their calendar, and proceeding at their pace. Professional installation usually takes longer than a DIY project, but is typically more accurate. You can also take advantage of a contractor’s guarantee and warranty.
The estimated cost of professional heat pump installation varies greatly depending on the size and type of heat pump, the job’s complexity, and other factors such as local labor rates. Professional installation of a basic heat pump can range from $6,500 to $7,500.
Before attempting to install a heat pump yourself, consider the unit’s size, its maneuverability, any wiring requirements, and the safety of those involved. Heat pumps are usually very heavy—weighing well over 1 ton—so having extra sets of hands is always helpful.
Before starting the installation, ensure you have the necessary tools and supplies. This includes electrical supplies, mounting brackets, wire connectors, and
ductwork
. You’ll also need to prep the area for installation and ensure the necessary wiring is present and up to code.
The cost to install a heat pump by yourself depends on the unit type and its size. The price can increase if the installation is complex and you end up enlisting professional help for portions of it. If you’re comfortable with the installation process and have all the necessary tools and supplies, a DIY
heat pump installation
can be an effective way to reduce costs while still getting a quality system.
Remember, you’re only saving the $75 to $125 per hour labor charge. You’ll still have to pay for the unit, permits, supplies, and other heat pump costs. If you’re at all unsure about your ability to install a heat pump correctly and safely, it’s best to hire a professional.
Installing a heat pump is an investment, but there are some ways to keep costs low.
: This
tax credit
is a federal incentive that encourages
homeowners
to invest in an energy-efficient HVAC system
. You must complete
Form 5695
with your taxes to apply.
: These pumps are relatively easy to install and don’t require major renovations. You’ll also avoid installing
ductwork
, saving time and money.
: Contractors will sometimes lower installation prices during spring and fall, when they’re less busy. Discounts on equipment and material are also typically offered during slower periods.
: Picking the correct size heat pump will eliminate the need for extra home modifications and materials.
: Different manufacturers’ products have different levels of quality and efficiency, as well as warranty lengths and customer service support. Research brands thoroughly to ensure you’re purchasing the best product for your needs.
Heat pumps are a great way to keep your home comfortable while saving money on energy bills. However, they do require a significant initial investment and should be carefully considered before making a purchase.
We recommend investing in a high-efficiency heat pump for the best long-term savings and value. Depending on your home’s size and your local climate, you may want to opt for a larger unit than necessary to ensure year-round comfort. We also recommend a professional heat pump installation to ensure it’s done correctly and efficiently.
Compare Quotes from HVAC Specialists
Just answer a few questions, and we’ll take care of the rest!
Get Free Estimates
You should replace your heat pump when it becomes less effective at keeping you warm in winter and cool in summer. This is typically around the 15-year mark. Have a professional inspect your heater before replacing it.
Heat pump installation cost ranges from $4,000 to $7,500, with an average of $5,500. A more cost-effective installation could be as low as $2,500, or up to $10,000 on the high end.
Despite their initial cost, heat pumps are a great, low-maintenance investment that can provide energy savings throughout the year. Heat pumps also don’t have risks for a gas leak, which can expose you to carbon monoxide.
With an energy-efficient HVAC system, you need 30 BTUs for each square foot of living space. A 2,000-square-foot home requires 60,000 BTUs of heat. This is just a general rule. It’s always best to consult a professional before investing in a heat pump.
When choosing a heat pump, consider your home’s size and layout. How much power does the pump need to heat and cool your living space? If your heat pump is too small, your home will struggle to maintain a comfortable temperature. You should also consider the compressor type, noise, efficiency ratings, and performance in your area’s climate.
The primary cost factors when installing a heat pump depend on the type of pump you choose and the size of your home. Here’s how that breaks down.
The type of heat pump you choose will likely be the biggest cost factor, as this impacts the installation process. Here are the five main types to choose from, along with price ranges, pros and cons.
The overall size of your home, along with the local climate, determines the size of the heat pump you need to adequately regulate the temperature throughout the year. The size of a heat pump is illustrated in tons, with models available in 2 to 5 tons. The costs increase as you start looking into larger-capacity heat pumps. Small units range from $3,800 to $6,600, while larger-capacity units cost up to $9,000 or more, depending on the efficiency rating.
Many reputable manufacturers specialize in heat pumps. Here are some of the big players in the industry, along with the average price range to purchase a unit. These ranges take into account both standard and high-efficiency heat pumps. The price range also fluctuates according to the type of heat pump the company specializes in.
Like most home renovation projects, your location can determine the price range. This is especially true of heat pumps, as certain types just don’t do well in cold weather. Air-source pumps are one of the cheapest options but aren’t the best fit for those living in colder regions.
With this in mind, it’ll be pricier to install a heat pump in the colder parts of the country when compared to areas with moderate or warm climates. Colder regions also demand larger heat pumps, further impacting the price.
Installing a heat pump is work best left to a qualified HVAC professional, unless you have a boatload of experience in various home systems. HVAC pros charge anywhere from $75 to $150 per hour and will likely account for 30 to 40% percent of your total budget.
Labor costs also truly depend on the type of heat pump you purchased. For a standard installation of a ductless mini-split heat pump, you could pay as little as $500 for labor, as this job is straightforward and quick.
However, other types of heat pumps often require more contractors to handle specific tasks. For instance, geothermal units must be buried at least 4 feet into the ground, often requiring an excavation expert. Solar-powered pumps will require the professional installation of panels.
Finally, most heat pump types deliver cooled and warmed air through ducts. If you lack the proper ductwork, that’ll also drastically increase labor costs. With all of this in mind, the cost range for labor here is vast. Some jobs cost as little as $500, while others extend all the way to $20,000.