Gate valves are a type of valve that is widely used in many different pipeline systems to connect and shut off the flow of the medium. Gate valves are not suitable for regulating the flow of the medium, but they can judge the amount of flow according to the height of the sanitary valve stem. Compared with other types of valves, the gate valve is more versatile and has a wider range of applications for pressure, temperature, and caliber.
If you want to learn more, please visit our website.
There are several different types of gate valves that all serve slightly different purposes in fluid, gas, and slurry processing systems. Gate valves are categorized by their internal framework and by valve stem type.
Gate valves can have four different styles of the internal framework, mostly differing in the type of sealing plate. The four different structures are edge single gate plate type, elastic gate plate type, double gate plate type, and parallel gate plate type.
Gate valves can have two different types of valve stems a rising stem gate valve or a non-rising stem gate valve.
Gate valves are commonly used to control fluids by starting and stopping the medium. They only offer minimal flow regulation, so they are suited to efficiently execute a range of industrial functions. You should consider the pros and cons of gate valves to determine if they’re the right fit for your pipeline system. Let’s take an in-depth look at the advantages and disadvantages of gate valves below.
The gate valve’s body is a straight-through shape that does not alter the flow direction, allowing fluid to pass through the valve (when in the fully open position) with minimal resistance compared to other types of valves.
Gate valves provide better sealing performance than shut-off valves. The gate valve’s opening and closing mechanisms are faster and more convenient than those of the shut-off valve.
Gate valves are extremely versatile and can be used in applications with mediums like steam, oil, and other media. Plus, gate valves can be used in mediums containing granular solids and with high viscosity. It can also be used as a venting valve and a low vacuum system valve.
Gate valves have dual flow directions. They’re not limited to one-way flow, nor are they subject to the flow directions of the medium. Therefore, gate valves are suitable for use in pipelines where the flow direction may change. Plus, they are easier to install than other more sophisticated types of valves.
During the opening process, the valve plate needs to be lifted to the upper part of the valve chamber. During the closing process, the valve plate needs to fall into the valve seat. The distance that the valve plate must move in order to open or close is relatively large, leading to a long opening and closing time. This disadvantage makes gate valves impractical for applications that require rapid actuation.
The opening and closing processes between the valve plate and the two sealing surfaces of the valve seat can create excess friction that may lead to scratches on the sealing surface. These scratches might seem innocuous, but eventually, they have an impact on the sealing performance and the service life. These damages are not always easy to repair, but gate valves are easy to install and replace.
Gate valves are usually used to shut off fluid flow completely or provide full flow. Gate valves generally operate in either fully closed or fully open positions. Gate valves only have a few parts, which makes them easy to install. The components of gate valves are a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve.
Thank you for reading our article and we hope it can help you better understand the advantages and disadvantages of gate valves. If you want to learn more about sanitary valves, we would like to advise you to visit the Adamant Valves homepage for more information.
A gate valve is a wedge disc for opening and closing. The movement direction of the brake is required to be perpendicular to the direction of the fluid. It can be opened and closed completely, and cannot be adjusted or throttled. The gate valve is sealed by the contact between the valve seat and the gate. Usually, the metal material is sealed and welded to improve the wear resistance. The gate is divided into rigid and elastic gates and is widely used in chemical, petroleum, light industry, hospitals, environmental protection, etc.
How does a gate valve work? The opening and closing disc of the gate valve is the wedge disc, which has two sealing surfaces. The most commonly used mode is that the two sealing surfaces of the gate valve form a wedge. The wedge angle depends on the valve parameters, which is usually 5°, and is 2°52' when the medium temperature is not high. The gate of the wedge gate valve can form a whole, which is called a rigid gate. It is possible to manufacture gates that can produce slight deformation so as to improve the manufacturability, and compensate for the deviation of the sealing surface angle during processing. This kind of gate is called an elastic gate. After the gate valve is closed, the sealing surface can only be sealed by the pressure of the medium. In other words, according to the media pressure, the sealing surface of the gate can be pushed into the other side to ensure the sealing of the sealing surface, which is called self-sealing. Most gate valves adopt the method of forced sealing.
kairuite are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
1. The flow resistance is small. The media channel inside the valve is straight, and the flow resistance is small.
2. It is easier for it to do the opening action. Because compared with the shut-off valve, the movement direction of the gate valve is perpendicular to the direction of the medium flow, whether it is open or closed.
3. High and long opening and closing time. The opening and closing stroke of the gate is relatively large, and the elevator is carried out by screws.
4. Water hammer is not easy to occur.
5. The two sides of the channel are symmetrical, and the medium can flow in any direction from both sides, which is convenient for installation.
6. The structure length (the distance between the two connecting end faces of the system shell) is small.
7. The gate valve has simple body shape, short structure, good manufacturing technology and wide application range.
8. The gate valve boasts compact structure, good valve rigidity, soft channel, small flow resistance, long sealing surface between stainless steel and hard alloy, long service life, PTFE packing, reliable sealing, light and flexible operation.
Related News & Blog
The Role of High Alloy Valves in Chemical Processing IndustriesChemical processing industries play a pivotal role in producing a wide range of products that impact our daily lives, from pharmaceuticals and plastics to petrochemicals and specialty chemicals. Withi...
Freeze Protection and Maintenance of the Gate Valve in WinterIn the winter, the temperature drops rapidly, and the gate valve often freezes. If it is not handled at this time, the pipeline is prone to failure. If it is in some high-risk conditions, accidents ma...
Weidouli Valves Participated in the 2023 EXPOMINRecently, the 2023 EXPOMIN was grandly opened in Santiago, Chile. This exhibition gathered more than 1,000 companies and over 40,000 business representatives from all over the world to analyze and dis...
If you are looking for more details, kindly visit gate valves for oil and gas industries.