Mineral processing is a metallurgical process of separating valuable minerals from concentrated ores. It is also called mineral dressing and is performed on-site. It is a mechanical process that ensures the extraction of a desirable mineral from the ore.
If you are looking for more details, kindly visit our website.
The process allows the yielding of a maximum amount of mineral concentrate before the product enters the market. With this process, it is possible to extract various materials, including metals, rocks, and industrial ores.
Read Also :-What are the Fly Ash Separation Technologies?
For efficient processing of minerals, various equipment is available in the market. These are rich devices that deliver high-quality results. If you want to achieve the desired results, consider using the best equipment.
Here, we share the best mineral processing devices that are worth considering.
This equipment is used to beneficiate metals, including ore washing and gravity concentration. The device beneficiates minerals like gold ore, quartz, copper ore, fine mud, magnetite, iron ore, cement clinker, etc.
This equipment can beneficiate different particles in the slurry and dehydrate them in the washing operations. They are useful in separating ore sands by creating a closed circuit in the concentrator.
Read Also :- The Importance of Limestone Beneficiation
Another category of mineral processing devices involves cone crushers, jaw crushers, SAG mill grinders, pebble crushers, ball mill grinders, and road mill grinders. This device is useful for materials like silicate, cement, refractory, building, non-ferrous, and ferrous materials.
Read Also :- Use of Rapeseed Meal as a Feed
This equipment affects the grinding efficiency of the ore processing plant and eventual product quality. It is useful for milling and mixing materials like paints, chemicals, and minerals into fine powders.
Dewatering screens, belt press filters, hearth dryers, rotary dryers, spray dryers, fluidized beds, and rotary tray dryers are the common dewatering equipment in mineral processing. This equipment regulates the tailings and concentrates produced by various dewatering techniques so the pulp products can transform into a transportable condition.
It removes water from mineral concentrates, reduces the weight and volume of the material, and offers improved transportation and handling. The common methods of dewatering are filtration, centrifugation, drying, and thickening.
Mineral concentration is a technique to separate minerals based on distinct properties of the particles from mineral mixtures. These devices are useful in various concentration technologies like gravity concentration, flotation, and magnetic concentration.
This equipment needs no electric power and is useful for various materials like ferrous metals, precious metals, non-metals, and non-ferrous metals. The maximum feed size obtained is 3mm. The magnetic separator is the most commonly used concentration equipment for wet and dry use.
Finally, electrostatic separators are the most efficient and promising mineral processing device available. These powerful devices based on tribo-electrostatic technology separate mineral particles based on their electromagnetic nature or charge. The separator charges particles with negative and positive charges and separates high-quality produce from low-grade impurities.
These are the best mineral processing equipment available for use. Every device with high-grade components is engineered to yield a high amount of mineral concentrate. You can use them in your business to gain high-quality produce. Among them, the best equipment is an electromagnetic separator device.
If you want rich quality produce at competitive rates for mineral processing, consider contacting Steqtech. Our equipment separates valuable minerals from ore into marketable and concentrated products. Our device offers low-cost and easy functionality, ensuring you gain rich produce for all substances. Reach out to us to secure the best mineral processing equipment and carry out the procedure smoothly and efficiently without incurring heavy expenses or high maintenance.
Hydrocyclone is an effective separation equipment that carries on two-phase fluid separation by using the centrifugal force field, which is a non-motion separation device composed of the upper cylinder and the lower cone. In the mineral processing, hydrocyclone is mainlyused in the classification of grinding circuit, especially the classification in the fine grinding. Besides, hydrocyclone can also be applied in the desilting and thickening operation.
Different applications mean the various requirements for the technical parameters of the hydrocyclone, including structure parameters, operating parameters, feeding properties. All of them are correlated and constrained mutually, each of them is not easy to be adjusted and controlled, so we must understand each technical parameter before choosing the hydrocyclone.
1. Diameter and height of the cylinder
For more information, please visit Zoneding machine.
The diameter of the cylinder is the main reference point to determine the size of hydrocyclone, which has a certain ratio with other spare parts. Increasing the diameter of the cylinder can improve the processing capacity of the hydrocyclone, but the overflow particle size will be coarser at the same time. For the fine materials with large processing capacity, the cyclone unit composed of several small hydrocyclones in parallel can be adopted.
The height of the cylinder has a significant influence on the residence time of slurry and classification efficiency in the hydrocyclone. When the overflow pipe inserts into a certain depth, increasing the height of the cylinder can prolong the separation time, decrease the separation granularity and improve the separation efficiency, but also has the negative effect on reducing the output and increasing the energy consumption. In general, the effect is the best when the height of the cylinder is 0.6-1.0 times of the diameter of the cylinder.
2. Diameter of the feeding port
Generally, the diameter of the feeding port is 0.13-0.25 times of the diameter of hydrocyclone. Appropriately increasing the diameter of the feeding port can improve the processing capacity of the hydrocyclone, but the classification efficiency will be reduced to some extent at the same time. In general, the cross-section shapes of the feeding pipes are mostly circular and rectangular, and most of them are rectangular. The configuration mode is that the long side is parallel to the axis of hydrocyclone, while the short side is perpendicular to the axis of hydrocyclone.
In the early stage, the structural form of feeding pipe and its connection with the cylinder body were mostly tangential,which was featured with simple structure and convenient configuration, but the flow pattern changed suddenly and the loss of on-way resistance was large,which was easy to generate turbulence. Later, involute feeding pipe was widely adopted, reducing the energy consumption, increasing production capacity and improving the separation efficiency.
3. Diameter of the overflow pipe
The overflow pipes are mostly circular, and their diameters are usually 0.2-0.3 times of the diameter of the hydrocyclone. The main function of overflow pipe is to draw out the overflow product smoothly and constantly. Increasing the diameter of the overflow pipe, the overflow flow will be increased, but the overflow particle size will also be coarser, and the concentration will be increased while the fine particle decreases.
4. Output size of the hydrocyclone
Usually, increasing the output diameter,the overflow is reduced, and the overflow is finer, the output capacity is increased, the concentration is lower, and the fineness is increased, but the processing capacity of hydrocyclone is not significantly affected. Reducing the output diameter, the discharging capacity of the sand setting is reduced. If too small, the coarse grains will stock at the top of the cone, so that appear jams phenomenon.
In general, the diameter of the output should ensure that the sand is discharged in an umbrella shape, and the included angle of 20°-30° is the ideal value. The diameter of output is usually 0.07-0.1 times of the diameter of the overflow pipe.
5. Insertion depth of the overflow pipe
If the overflow pipe is inserted too shallow, the short-circuit flow rate will increase, the separation time will be shortened, and the content of coarse grain in the overflow product will increase, and the content of fine grain in the output product will increase,but the classification efficiency decreases. If the overflow pipe is inserted too deep, the coarse particle size at the bottom will enter the overflow, which reduces the classification efficiency of the hydrocyclone. In general, the insertion depth of the overflow pipe should be 0.5-0.8 times of the height of the cylinder.
6. Cone angle of the cylinder
Increasing the cone angle of the cylinder will decrease the height of hydrocyclone and increase the average radial velocity of the slurry. At the same time, because the flow resisting of the cone is increased, the upward flow velocity of the slurry will be increased corresponding, which leads to the overflow particle size become coarser.Therefore, it is suggested to adopt a large cone angle (30°-60°) to separate the coarse-grained particles, and adopt a small cone angle (15°-30°) to deal with mud removal.
7. Feeding pressure of the hydrocyclone
The feeding pressure has a direct influence on the processing capacity and separation particle size of the hydrocyclone. Normally, the feeding pressure should be maintained at 49-157 kPa. Increasing the feeding pressure can reduce the classifying granularity and increase the processing capacity. But at the same time, it can also significantly increase the power consumption and the wear of hydrocyclone. When the hydrocyclone works normally, the feed pressure should maintain a stable value.
8. Slurry property
The pulp properties mainly include density,particle size and pulp concentration. At the same slurry concentration, the higher the density of ore, the finer the grading granularity.
When the slurry concentration is large and the mud content is high, the viscosity and density of the pulp will increase accordingly, which increases the movement resistance of the particle size and makes the grading particle size coarser. The ideal slurry concentration should be determined by mineral processing test according to specific production condition.
To sum up, the hydrocyclone operator can timely adjust the operation by adjusting the slurry pressure, changing the output diameter, slurry concentration, cone angle, the size of feed pipe and overflow pipe and the composition of particle size. In addition, it is recommended to purchase the hydrocyclone from the professional and regular hydrocyclone manufacturers and consult the professional hydrocyclone technicians according to the actual production conditions to achieve a win-win situation of technical indicators and economic benefits.
If you are looking for more details, kindly visit Mineral Separation Equipment.