Quality Fasteners from the Most Trusted Brands in ...

Engineered Components Company have been industry leaders in fastener supply since . That&#;s forty years of supplying the best fasteners on the market to clients throughout country. We are proud to be authorized distributors of fasteners from some of the most recognized and respected names, in the industry, so no matter what sort of screws, nuts, bolts, or specialty fasteners your company needs, you can depend on us to ensure you always have the inventory you need to get the job done. We take great pride in helping production companies run smoothly and profitably, so read further for more information about how Engineered Components Company can help you.

Click here to get more.

Dependable Products from Brands You Know

When you entrust your fastener needs to the professionals at Engineered Components Company, you will benefit from the combination of superior customer service and quality products from industry leaders. We are proud to carry products from great companies, like Stanley Engineered Fastening, Camcar, Olympic Fastening Systems INC, TRW, Pop Avdel, Huck, Marson, Southco, Tinnerman Palnut Engineered Products LLC, Heyco, Camtainer, Torx, Infasco, and ITW Buildex, among many, many others. In addition to the quality fasteners we offer, we also have the capabilities to help in other ways, like salt spray testing, quality control, fabrication of specialty products, engineering and design of custom parts, UV testing, and more. With increased efficiency and reduced overall costs for your business, partnering with Engineered Components Company is a great way to ensure your crew has the tools they need for prolonged success.

We Hold Patents for Eight Different Products

At Engineered Components Company, we take great pride in our capabilities for innovation, and we are proud to hold eight product patents. Our commitment to our customers&#; needs has made us industry leaders when it comes to encapsulated nuts and bolts, holding patents on the following products:

• Low Profile Encapsulated T-Nuts and Mating Screws
• Encapsulated Rib Neck T-Nuts and Mating Screws
• Encapsulated Barbed T-Nuts and Mating Screws
• Specialty Floor Screws
• Replacement Floor Screws

Be sure to contact us with any questions you may have about the products we have patented.

yiyuan are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Quality Fasteners for a Wide Variety of Industries

The professionals at Engineered Components Company have experience providing fasteners to companies in a wide variety of industries. The range of products we can supply makes us your go-to source for quality fasteners that you can depend on. The industries we serve include truck trailer production, windows and doors, boating, automotive, plumbing, bridge building, HVAC, and many others. If you are looking for a dependable supplier of high quality fasteners for your business, contact us and let us know how we can help.

Milland said:

Hi Tom,
If I understand the question, it's not the standards per se, it's *adherence* to the standards, in terms of manufacturing methods and quality control, material spec control, and heat treatment. It's easy to cheat with low alloy/high carbon steels that are over-hardened to meet tensile specs, but have terrible fatigue life due to brittle condition.

Random metallurgy of the feed stock, having poor control of thermal conditions during heading and thread rolling, improperly maintained dies and rollers, worn equipment, etc. - all these can produce a fastener, but not one I'd want on a car or plane I was in...

Click to expand...

.
worked in a USA company making a photographic product. they made millions of photograph
materials and got occasional quality complaints. they installed a high speed scanner that cost
close to a $1,000,000 and could see defects going by at feet per minute and cut out the
bad stuff. Turned out defects were from rain water and a leaky roof. They hung up tarps with hose
fitting to divert water away from machine.
.
bottom line any company no matter where located does not spend a $1,000,000 on quality
control unless they have complaining customers. who in USA would send a broken bolt back to
manufacturer ?? there is no guarantee every bolt is xrayed and tested for defects unless you
pay more for it no matter what country it is made.
.
often in any country items are manufactured by a customer asking a buyer to make some
calls to machine shops and items are manufactured. it customer does not have a detail spec
of what he wants made then yes it could be random what quality he gets and more often it is
not of highest cost / quality because it was not requested.
.
i know in China if you buy metal you can ask for a government stamped spec on metal purchased
and if it is not what you bought the store owner can go to a Chinese jail for a long time. no
store owner will risk going to a Chinese jail.
........ basically if you ask for spec or certification you can easily get it. if you do not ask for it
then what you receive as finished goods is random. same in all countries

worked in a USA company making a photographic product. they made millions of photographmaterials and got occasional quality complaints. they installed a high speed scanner that costclose to a $1,000,000 and could see defects going by at feet per minute and cut out thebad stuff. Turned out defects were from rain water and a leaky roof. They hung up tarps with hosefitting to divert water away from machine.bottom line any company no matter where located does not spend a $1,000,000 on qualitycontrol unless they have complaining customers. who in USA would send a broken bolt back tomanufacturer ?? there is no guarantee every bolt is xrayed and tested for defects unless youpay more for it no matter what country it is made.often in any country items are manufactured by a customer asking a buyer to make some phonecalls to machine shops and items are manufactured. it customer does not have a detail specof what he wants made then yes it could be random what quality he gets and more often it isnot of highest cost / quality because it was not requested.i know in China if you buy metal you can ask for a government stamped spec on metal purchasedand if it is not what you bought the store owner can go to a Chinese jail for a long time. nostore owner will risk going to a Chinese jail......... basically if you ask for spec or certification you can easily get it. if you do not ask for itthen what you receive as finished goods is random. same in all countries

Contact us to discuss your requirements of Custom Fastener Manufacturer. Our experienced sales team can help you identify the options that best suit your needs.